Other

A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

- Cartridge Bearing - 1-3/8-inch Outer Diameter

• Aluminum clamp with a chromoly bolt

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

46 x 55 x 51 x 152mm

- Large Flange-Fits Splined MX Cranks - Sold in pairs

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- Use: S.I.S. - Length: 30mm

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

- DT Swiss cartridge bearings - Sold in pairs

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Alloy construction - Great for Cruiser or BMX bar conversions

- Replacement M5 lock nut for cable anchor bolts, fender bolts, etc. - Bag of 10

- Stainless steel button head bolts - Sold in bags of 10

- Standard replacement cantilever/v-brake bosses

• Aluminum • CNC-finished

- For MTB levers - 7mm x 1mm - Aluminum construction

• Forged aluminum seat clamp • Chromoly integrated QR seat binder bolt • Increased durability and clamping force

• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Replacement cable anchor bolt for brakes - Includes nut and washer

• Aluminum clamp • Built-in rear rack mount

• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish

• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm

Replacement bearing for the lower half of YST8003 #7 headset.

Designed for maximum comfort, ergonomics, & durability - Bag of 10

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

- Type: Lock washer - Size: 1" Keyed

- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm

• Quick-release seatpost clamp • Chrome-plated chromoly • Rubber-covered handle for a great grip

- Use: Brake - Length: 30mm - Diameter: 5mm

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Universal design double rail saddle clamp

- Crown Race - Size: 27.0mm

- Variable widths - Left: 35mm - Center: 52mm - Right: 37.5mm - Length: 124.5mm - Overall: 145.5mm

Sunlite braze-on front derailleur adapter

- Replacement padded arm rests for clip-On Tri-Bar II - Easy clip on installation fits most road bars - Clamp Size: 22.2mm

- M8 Top Plate Nut

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Replacement front cable hanger - Aluminum construction

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Standard steel replacement

- Sunlite replacement cartridge bearings - Sold in pairs

Sunlite's Lowrider Sissy Bar adds that level of style and classic looks that only a nice, long sissy bar can. Keep that banana seat comfortably slung and looking tight.

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

- Rust-resistant coating - M8x16mm - Shell: 8mm flanged axle bolt - Includes 2 bolts

- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10

Replacement LH cup for English threaded European bottom brackets. - Cup Material: Steel

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Chrome allen seat binder bolt

- Rubber - Color: Black

• Quick-release seatpost clamp • Full stainless-steel construction • Rubber-covered handle for a great grip

- Ahead Stem Shim allows the use of 1-1/8 stem on 1" steerer tube - 28.6mm/25.4mm

- Hub sealed bearing - Fit: ID 15mm - I.D.: 15mm - O.D. 28mm - Width: 7mm

- Aluminum w/lock nut and mount - Slotted mount design

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Axle mount rear derailleur guard - Essential for children`s multi-speed bikes